200, Jalan Sultan, #02-36A, Textile Centre, Singapore 199018 (Tel) : +65 62933968 / Operating Hours : (Mon-Fri 12pm-7pm) / (Sat & Eve of PH 12pm-6pm) / Sundays Close






Visit our Shopfront


Advance Drones > AstroX 230mm Frame


AstroX 230 Racing Quad Airframe.
(Made In Korea)

The AstroX230 FPV Quadcopter Carbon Fiber Edition.
World top class "Japan Toray T300" pure carbon sheet.
Alu US 7075 T6 M3 bolt for Alu standoff. (bottom anf top)
Alu Hard anodizing coated finishing.
Symmetric 230mm size airframe that accommodates 5" props.
Designed to support a 3-4s lipo setup.
M5 Alu 6061 prop nylon lock flange nuts included.

• Full 3K Toray Carbon Fiber airframe featuring a solid 3mm thick "Unibody" main plate.
• Full protect design end of the arms to protect the motor during a crash.
• 2oz+2oz Integrated power distribution board for ESCs and FPV flight electronics
• Easy Lipo Access (suggested Lipo is a 3-4s li-po 1000mah-1300mah)
• Support for HS1177 600TVL cams as well as cams in cases with mounting bracket
• Support for HD camera (such as the Mobius or Gopro)

• AstroX230 carbon fiber airframe(Unibody) x 1set
• Alu 6061 T6 HEX standoff 35mm x 8ea
• Alu 6061 T6 Round end landing gear 10mm x 4ea
• Alu 6061 T6 Round standoff for battery guide 10mm x 2ea
• Alu 6061 T6 M5 Motor prop Nylon lock nuts x 4ea
• AstroX Power distribution board x 1ea
• US Alu 7075 T6 M3x6mm Round head bolts x 14ea
• US Alu 7075 T6 M3x8mm Round head bolts x 10ea
• US 12.9 Carbon steel M3x6mm Black Nickel Plating Bolts for Motors x 16ea
• US 12.9 Carbon steel M3x8mm Black Nickel Plating Bolts for Randing gear x 6ea
• Lipo Velcro strap x 1ea (Hard)
• Cam Velcro strap x 1ea (Soft)
• 6mm Nylon Standoff for PDB x 4ea
• 8mm Nylon Standoff for FC x 4ea
• M3 Nylon nuts x 4ea


This Kit is not suitable for beginners as it is not a ready-to-fly kit.
Assembly & Radio Setup required.

(Air Frame Only)