200, Jalan Sultan, #02-36A, Textile Centre, Singapore 199018 (Tel) : +65 62933968 / Operating Hours : (Mon-Fri 12pm-7pm) / (Sat & Eve of PH 12pm-6pm) / Sundays Close

Home

Email

facebook

Twitter

Youtube

Visit our Shopfront







 



Power Distribution Boards / OSDs / Accessories
ITEM
Description
Price
Piezo Buzzer with JST


Piezo Buzzer with JST


Description:

Light weight Piezo buzzer for use as an audio warning when activating and deactivating the FC board and also serves as a warning for low voltage in flight.

Features:
Weight: 2.8g
Dimensions (Buzzer): 9 x 11.8mm
Wire Length: Approx 100mm
Plug: JST
Voltage: 3.7V - 5V

The buzzer can be used as a lost model beeper and battery voltage monitoring.
Requires user to activate these functions and switch assignments via Cleanflight/Betaflight GUI.

Supplied with a 10cm jst connector, this unit does not require soldering, however may require a little hot glue around the heatshrink

 

SGD$5.50




Blackbox flight data recorder CLEANFLIGHT OPENLOG


Blackbox Flight Data Recorder CLEANFLIGHT OPENLOG

Description:

Log all your flights on a SD Card. loaded with the special OpenLog Blackbox firmware.
This feature transmits your flight data information on every control loop iteration over a serial port to an external logging device to be recorded via Micro SD Card (Not included).

Firmware main info here :
https://github.com/cleanflight/blackbox-firmware

After your flight, you can process the resulting logs on your computer to either turn them into CSV (comma-separated values) or render your flight log as a video using the tools blackbox_decode and blackbox_render. Those tools can be found in this repository:
https://github.com/cleanflight/blackbox-tools

You can also view your flight logs using your web browser with the interactive log viewer here :
https://github.com/cleanflight/blackbox-log-viewer


Features:
• Ultra light weight
• Dual LED indicator
• Default baud rate: 9600
• Support MicroSD FAT16/32 up to 16GB

Specifications:

• Weight: 3.5g
• Input Voltage: 5V
• Main board size: 4x15x19mm

Package Included:

1x Cleanflight Openlog Flight Data Recorder

 

SGD$23.50














NAZE 32 S.BUS SIGNAL INVERTER- New!
S.BUS Signal Inverter Cable for NAZE32 Board (REV5)
- 2 Polarity +- (Red/Black) at the top board / 1 white to PIN 4 at bottom
- Compatible with RADIOLINK and FUTABA or other S.BUS Protocol System


SGD$8.50


ESC Linker - New!
ESC LINKER (USB)
Compatible with SIMONK and BLHELI ESCs, BLHeli Bootloader Or SimonK BootLoader, Atmel or SiLabs chips! (with or without Bootloader), supports ISP and C2 mode. This allows you to change the Bootloader, flash new Firmware normally, change settings or fix then the Bootloader as not been installed. It is the ultimate Multi-functional esc tool

- Direct plug design, works with most USB port and USB extension cable
- Low power consumption design - On board 2x3 Pin AVR ISP port
- 3pin servo connector, can be used as servo or C2 connection
- Supports SIMONK and BLHELI ESC, KKflashtool compatible
- KKflashtool and RapidFlash compatible
- Silabs CP2102 Driver chip! (Win,Mac,linux)
- Software upgrade-able (via Arduino or BLHELISUIT)
- Weight : 4.1 g
- Dimensions :420mm x 190mm

SGD$14.50


Counter